€33.95*
delivery time: Sofort verfügbar
For repairing damage to the outer skin, such as scratches, scuffs, hairline cracks and blisters, as well as for coating polyester laminate. Very resistant to UV light, ageing and weathering.
Instructions for use:
- Carefully and very carefully mix the required amount of gelcoat with approx. 1-3 % hardener.
- the gelcoat hardens tack-free on the surface
- then sand the surface with very fine wet sandpaper
- and polish to a high gloss with sanding/polishing paste.
- Do not return the mixed quantity to the can.
- Working time: approx. 10-15 min. at 20°C.
- Sandable after 4 hours.
- Curing time: approx. 24 h at 20°C.
Only use with hardener.
Safety information
Hazard warnings:
H226 Flammable liquid and vapour.
H242 Heating can cause fire.
H315 Causes skin irritation.
H317 May cause allergic skin reactions.
H319 Causes serious eye irritation.
H410 Very toxic to aquatic organisms with long lasting effects.
H412 Harmful to aquatic organisms, with long lasting effects.
EUH phrases:
EUH211 Caution! Hazardous respirable droplets may be produced when spraying. Do not inhale aerosol or mist.
Safety instructions:
P101 If medical advice is required, have packaging or labelling ready.
P102 Keep out of the reach of children.
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. Do not smoke.
P273 Avoid release into the environment.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P302+P352 IF ON SKIN: Wash with plenty of water/soap.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove any contact lenses if possible. Continue rinsing.
P403+P235 Store in a well-ventilated place. Keep cool.
P501 Dispose of contents/container to a recognised waste disposal company.
Address: Bürgermeister-Bombeck-Str.1, 22851 Norderstedt, Germany
Contact: www.yachticon.de
Email: yachticon@yachticon.de
Log in