Seajet Peller Clean / Bewuchsschutz 315 ml
€119.95*
delivery time: Sofort verfügbar
Seajet Peller Clean is a foul-release propeller coating for propellers, stern gears and trim tabs.
Seajet Peller Clean is environmentally friendly, free of biocides and offers long-term protection.
It consists of a 2-component ochre-coloured primer and a 1-component transparent top coat.
Primer: 1 x 157ml Seajet Pellerclean Primer base Colour: beige + 1 x 43ml Seajet Pellerclean Primer hardener
Final coat: 1 x 115ml Seajet Pellerclean clear Coat Colour : clear
For: Outboard engine sizes up to 150 hp.
Number of coats: 2
Coverage: approx. 0.7sqm/litre
Packaging unit: Set of 3 / complete 315ml or 1.75L
Suitable for: Steel, aluminium and bronze
Gebrauchsanweisung:
Preparation:
- Thoroughly remove old coatings and dirt.
- Sand the surface (depending on the material) and clean and degrease with fresh water
Apply primer:
- Mix Primer Base with hardener well (approx. 5 min).
- Apply two coats with a brush, 1 hour apart.
Apply Clear Coat:
- After the primer, apply the first coat of Clear Coat.
- Apply second and third coats 2 hours apart.
Important:
- Application from +10°C, only in dry weather.
- Do not allow to reach water for at least 8 hours after the last coat.
- Always use new brushes, dispose of residues in an environmentally friendly manner.
Safety information
Hazard warnings:
H225 Highly flammable liquid and vapour.
H226 Flammable liquid and vapour.
H304 May be fatal if swallowed and enters airways.
H314 Causes severe skin burns and eye damage.
H315 Causes skin irritation.
H317 May cause allergic skin reactions.
H318 Causes serious eye damage.
H336 May cause drowsiness and dizziness.
H341 Can probably cause genetic defects .
H361 Suspected of affecting fertility or harming the unborn child
H373 May cause damage to organs through prolonged or repeated exposure.
H411 Toxic to aquatic organisms, with long lasting effects.
H412 Harmful to aquatic organisms, with long lasting effects.
H351 Can probably cause cancer .
H335 May irritate the respiratory tract.
H302+H312 Harmful if swallowed or in contact with skin
EUH phrases:
EUH208 Contains 3-aminopropyltriethoxysilane, N-(3-(trimethoxysilyl)propyl)ethylenediamine. May cause allergic reactions.
Safety instructions:
P101 If medical advice is required, have packaging or labelling ready.
P102 Keep out of the reach of children.
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. Do not smoke.
P273 Avoid release into the environment.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P310 Immediately call POISON INFORMATION CENTRE/doctor/.../.
P301+P330+P331 IF SWALLOWED: Rinse mouth. DO NOT induce vomiting.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove any contact lenses if possible. Continue rinsing.
P260 Do not inhale dust/fume/gas/mist/vapour/aerosol.
P308+P313 IF exposed or concerned: Get medical advice/attention.
P501 Dispose of contents/container to a recognised waste disposal company.
P391 Absorb spillages.
P370+P378 In case of fire: Use foam (alcohol-resistant) to extinguish.
P403+P235 Store in a well-ventilated place. Keep cool.
Dokumente
Seajet - High-quality colours from CMP
Seajet is part of Chugoku Marine Paints Ltd (CMP), one of the world's largest manufacturers of marine and industrial coatings. CMP has a global network of 105 locations in 35 countries and brings decades of experience in the development of high-quality products.
Seajet products are manufactured in a state-of-the-art factory in the Netherlands. This production facility utilises the latest technology with renewable energy: 1190 solar cells and geothermal energy ensure a sustainable energy supply. Emissions have been reduced by up to 95%, while occupational safety and environmental protection are top priorities.
Since the 1990s, Seajet has been impressing customers with innovative antifouling coatings, topcoats, primers and paints. The product portfolio combines innovation, quality and environmental responsibility to provide optimal solutions for boat owners worldwide.
Seajet & Yachticon - a partnership with history
Yachticon is proud to have been working with Seajet for over 20 years. What began as a business partnership has long since grown into a close, friendly relationship. Together we share a passion for quality, innovation and sustainable solutions in water sports.
The close co-operation between Yachticon and Seajet enables us to offer our customers not only excellent products, but also sound advice and proven solutions for every application.
Address: Sluisweg 12, 4794 SW Heijningen, The Netherlands
Contact: www.seajetpaint.com
Email: seajet@cmpeurope.eu
Log in